Grbl_Esp32 Error 5

Grbl_Esp32ErrorPosition is kept

You asked the machine to home, but homing is turned off in its settings.

Position is kept. An error means the controller refused that one line or command, so nothing moved for it. (Hamrun's reading)
What to do
  1. Turn homing on ($22=1 on GRBL) only if the machine has limit switches.
  2. If it has no switches, set work zero by jogging instead of homing.
Name in the Grbl_Esp32 source: SettingDisabled. The meaning above is in Hamrun's words; Grbl_Esp32's own message text isn't copied here. source

Got a different message?

Paste it into the decoder. Hamrun's editor checks your G-code before you run it, so a toolpath that leaves the machine's travel or a missing feed rate is caught before the machine stops. Have the whole file? Check it here, free: it finds the line that triggers this, and the file never leaves your computer.

Related codes

  • GRBL 1.1 Error 5: You asked the machine to home, but homing is turned off in its settings.
  • grblHAL Error 5: You asked the machine to home, but homing is turned off in its settings.
  • FluidNC Error 18: You asked the machine to home, but homing is turned off in its settings.
  • Grbl_Esp32 Error 18: You asked the machine to home, but homing is turned off in its settings.
  • uCNC Error 5: You asked the machine to home, but homing is turned off in its settings.

Code name taken from the Grbl_Esp32 source on 2026-11-10; the meaning is in Hamrun's words and Grbl_Esp32's message text isn't copied. Steps and the position answer are Hamrun's reading unless marked “firmware says”. User reports are labelled CLAIMED.