Let it snow script
✓ Cut-checked304 × 77 mmBeginner
The Let it snow script is a connected script with a swash, all one piece. It is cut from 3 mm or 6 mm material. This design suits anyone adding festive wall art to their living room.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 304 × 77 mm (12.0 × 3.0 in)
- Pieces
- 1
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Hang on a wall with a sawtooth hanger
- Glue to a backer board for a sign
- Paint or stain and display on a shelf
How to make it
One connected piece: sand, then paint or stain. Hang with a sawtooth hanger or 3M strips, or glue to a backer board.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 2.98 mm | 2.59 mm |
| 3mm MDF | CO₂ laser | 2.98 mm | 2.63 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 2.98 mm | 2.59 mm |
| 3mm Acrylic | CO₂ laser | 2.53 mm | 2.55 mm |
| 6mm Plywood | CO₂ laser | 4.19 mm | 2.64 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 304 x 77 mm (12.0 x 3.0 in).
What materials and machines does it work with?
It was checked for 3mm Birch Plywood, 3mm MDF, 3mm Hardwood (walnut, maple, cherry), 3mm Acrylic, and 6mm Plywood. It works with CO₂ laser machines.
How many pieces does it have and what is the difficulty?
It has 1 piece. The difficulty is beginner.
