Love grows here banner
✓ Cut-checked380 × 106 mmBeginner
This banner-shaped sign reads 'Love grows here' in bold script with a leaf ornament and single border. At 380 x 106 mm, it is a beginner-friendly project for couples or family.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 380 × 106 mm (15.0 × 4.2 in)
- Pieces
- 1
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Hang in a living room as a decorative sign
- Give as a housewarming gift
- Paint or stain to match the decor
How to make it
Sand, paint or stain. Hang with a sawtooth hanger or 3M strips.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 3.18 mm | 1.50 mm |
| 3mm MDF | CO₂ laser | 3.11 mm | 1.52 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 3.18 mm | 1.50 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 380 x 106 mm (15.0 x 4.2 in) and is 1 piece.
What materials can I use?
It was checked for 3mm Birch Plywood, 3mm MDF, and 3mm Hardwood (walnut, maple, cherry).
What machines and file formats are supported?
It fits Glowforge (Basic/Plus/Pro), OMTech 50 W, xTool P2 / P2S, and CO₂ 600 × 400 beds. Comes in SVG and DXF. Difficulty is beginner.
