Love wins banner sign
✓ Cut-checked400 × 120 mmBeginner
This banner-shaped sign reads 'LOVE WINS' in bold sans serif with a double border and stars. At 400 x 120 mm, it is a beginner-friendly project for couples or friends.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 400 × 120 mm (15.7 × 4.7 in)
- Pieces
- 1
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Display at a wedding or Valentine's Day
- Hang in a living room as a statement
- Paint or stain to match the decor
How to make it
Sand and paint as desired. Hang with a sawtooth hanger or 3M strips.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 4.36 mm | 2.32 mm |
| 3mm MDF | CO₂ laser | 4.30 mm | 2.36 mm |
| 3mm Acrylic | CO₂ laser | 4.45 mm | 2.27 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 4.36 mm | 2.32 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 400 x 120 mm (15.7 x 4.7 in) and is 1 piece.
What materials can I use?
It was checked for 3mm Birch Plywood, 3mm MDF, 3mm Acrylic, and 3mm Hardwood (walnut, maple, cherry).
What machines and file formats are supported?
It fits Glowforge (Basic/Plus/Pro), OMTech 50 W, xTool P2 / P2S, and CO₂ 600 × 400 beds. Comes in SVG and DXF. Difficulty is beginner.
