Square leather stamp
✓ Cut-checked40 × 40 mmBeginner
This compact square stamp blank measures 40 x 40 mm and includes an optional ring detail. It suits beginner makers who want a simple leather or cork project. Use it for stamping or embossing in your shop or office.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 40 × 40 mm (1.6 × 1.6 in)
- Pieces
- 1
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- xTool F1 · K40-class CO₂ · xTool M1 / M1 Ultra · Diode 400 × 400 (Ortur, Sculpfun, Falcon) · Glowforge (Basic/Plus/Pro) · xTool S1 · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stamp logos or monograms on paper or leather
- Give as a teacher gift or business gift
- Use with 2mm leather or 3mm cork sheet
How to make it
Cut from 2mm leather or 3mm cork. No stitching required. Optionally glue a handle. Use for stamping or embossing.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 2mm Leather | CO₂ laser | 30+ mm | – |
| 3mm Cork sheet | CO₂ laser | 30+ mm | – |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the finished piece?
The design measures 40 x 40 mm (1.6 x 1.6 in) and is 1 piece.
What materials and machines can I use?
It has been checked for 2mm leather and 3mm cork sheet. Use a CO₂ laser.
What file formats are included?
You get SVG and DXF files. The design opens in the editor as shown with no text to change.
