Star snowflake, 140 mm
✓ Cut-checked117 × 132 mmBeginner
This six-spoke star pattern can be used as a trivet, window ornament, or gift topper. It is a single-piece design that suits holiday decor. Good for beginners.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 117 × 132 mm (4.6 × 5.2 in)
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Use as a trivet on the table
- Hang as a window ornament
- Paint as a door hanger
How to make it
One piece, cut in a single pass. Use it as a trivet (hardwood or cork), a window ornament (acrylic), or paint it as a door hanger.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 5.78 mm | 4.65 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 5.78 mm | 4.65 mm |
| 3mm Acrylic | CO₂ laser | 5.86 mm | 4.60 mm |
| 3mm Cork sheet | CO₂ laser | 5.76 mm | 4.70 mm |
| 3mm Basswood | Diode laser | 5.86 mm | 4.60 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the star snowflake?
The design is 117 x 132 mm (4.6 x 5.2 in).
What materials and machines can I use?
It was checked for 3mm birch plywood, 3mm hardwood (walnut, maple, cherry), 3mm acrylic, 3mm cork sheet, and 3mm basswood. Use a CO₂ or diode laser.
How many pieces does it have and what is the difficulty?
It is 1 piece and rated beginner. You get SVG and DXF files.
