Straight-flap envelope clutch
This classic envelope clutch has a straight flap and clean lines with stitch holes included. It measures 280 x 400 mm and suits minimal style. Good for yourself or friends as a New Year or wedding accessory.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 280 × 400 mm (11.0 × 15.7 in)
- Pieces
- 1
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- Diode 400 × 400 (Ortur, Sculpfun, Falcon) · xTool S1 · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Carry as an everyday clutch
- Use as a wedding accessory
- Make as a New Year gift
How to make it
Cut from 2mm leather or fabric. Stitch holes are pre-spaced; saddle-stitch with waxed thread. If using leather, burnish edges; fabric edges can be left raw or hemmed. Add a magnetic snap if desired.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 2mm Leather | CO₂ laser | 30+ mm | 1.30 mm |
| Fabric (cotton, denim, polyester) | CO₂ laser | 30+ mm | 1.25 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 280 x 400 mm (11.0 x 15.7 in) and is 1 piece.
What materials and machines can I use?
It was checked for 2mm Leather and Fabric (cotton, denim, polyester). It works with CO₂ lasers only.
What file formats are included?
You get SVG and DXF files. The design is intermediate-level and opens in the editor as shown.
