Welcome friends sign
This sign features WELCOME in raised serif letters inside a scallop frame with friends in script below and sparkle ornaments. It is a single connected piece that suits family and friends for housewarming or everyday decor.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 571 × 213 mm (22.5 × 8.4 in)
- Pieces
- 1
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- xTool P2 / P2S · CO₂ 600 × 400
- You can change
- Main word (up to 12 characters), Sub line (up to 22 characters)
Ideas
- Hang on a porch or entry door
- Display in a living room or hallway
- Give as a housewarming gift
How to make it
One connected piece: sand, then paint or stain. Hang with a sawtooth hanger or 3M strips, or glue to a backer board.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 2.98 mm | 1.31 mm |
| 3mm MDF | CO₂ laser | 3.07 mm | 1.62 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 2.98 mm | 1.31 mm |
| 3mm Acrylic | CO₂ laser | 2.49 mm | 1.21 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 571 x 213 mm (22.5 x 8.4 in).
What materials and machines can I use?
It was checked for 3mm Birch Plywood, 3mm MDF, 3mm Hardwood (walnut, maple, cherry), and 3mm Acrylic on a CO₂ laser. It fits xTool P2 / P2S and CO₂ 600 × 400 beds.
Can I change the text?
Yes, you can change the Main word (max 12 characters) and the Sub line (max 22 characters). Open the design in the Hamrun editor to personalize it.
