Western ribbon sign
This ribbon sign features western-lettered text cut through a banner with stars. It is a single piece that suits yourself or business and contractors for Father's Day or birthday gifts.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 708 × 115 mm (27.9 × 4.5 in)
- Pieces
- 1
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- Larger than the common desktop beds; it needs a large-format machine or a bigger sheet.
- You can change
- Text (up to 16 characters)
Ideas
- Hang in an office or workshop
- Display in a kitchen or on a shelf
- Give as a Father's Day or birthday gift
How to make it
Cut from one sheet; the letter centres are held by small tabs. Sand, paint or stain (a contrasting backer board behind the cut-outs looks good), then hang.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 3.51 mm | 2.32 mm |
| 3mm MDF | CO₂ laser | 3.52 mm | 2.34 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 3.51 mm | 2.32 mm |
| 6mm Plywood | CO₂ laser | 4.93 mm | 1.77 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- !Fits a common machine bed. At 708 × 115 mm it's bigger than the common beds listed; it needs a large-format machine.
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings.
Questions
What size is the design?
The design is 708 x 115 mm (27.9 x 4.5 in).
What materials and machines can I use?
It was checked for 3mm Birch Plywood, 3mm MDF, 3mm Hardwood (walnut, maple, cherry), and 6mm Plywood on a CO₂ laser. It is larger than common desktop laser beds and needs a large-format machine or a bigger sheet.
Can I change the text?
Yes, you can change the Text field (max 16 characters). Open the design in the Hamrun editor to personalize it.
