Layered woven wedding ornament, 140 mm
✓ Cut-checked134 × 134 mmBeginner
This 3-layer woven-pattern ornament has a small weave gap and includes a backing and hanging hardware. It is good for a wedding gift or favor. It suits couples celebrating a wedding or anyone who wants a minimal ornament.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 134 × 134 mm (5.3 × 5.3 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Give as a wedding favor at a reception
- Hang on a wall in a living room
- Use as a gift topper with a ribbon
How to make it
Cut layers from 3 mm plywood. Sand edges. Stack with wood glue. Add ribbon for hanging.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 2.98 mm | 0.98 mm |
| 3mm MDF | CO₂ laser | 2.94 mm | 1.42 mm |
| Cardstock (stencil) | CO₂ laser | 2.98 mm | 1.41 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the finished ornament?
The design measures 134 x 134 mm (5.3 x 5.3 in).
What materials can I use?
It was checked for 3 mm birch plywood, 3 mm MDF, and cardstock (stencil).
Which machines and file formats are supported?
It works with CO₂ lasers that fit a K40-class, Glowforge, OMTech 50 W, xTool P2 / P2S, or CO₂ 600 x 400 bed. You get SVG and DXF files.
