Two-pocket card holder
This compact card holder has two pockets for credit cards or business cards. It cuts from 2mm leather or 3mm cork sheet and requires intermediate skills to stitch. It suits anyone who wants a minimal everyday carry accessory.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 323 × 72 mm (12.7 × 2.8 in)
- Pieces
- 3
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- xTool M1 / M1 Ultra · Diode 400 × 400 (Ortur, Sculpfun, Falcon) · Glowforge (Basic/Plus/Pro) · xTool S1 · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Carry credit cards or business cards daily
- Give as a Father's Day or Christmas gift
- Add a monogram in the editor before cutting
How to make it
Cut from 2mm leather or 3mm cork. Stitch holes are pre-spaced; saddle-stitch with waxed thread. If using leather, burnish edges; cork can be left as-is. Add a monogram in the editor before cutting.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 2mm Leather | CO₂ laser | 3.19 mm | 1.30 mm |
| 3mm Cork sheet | CO₂ laser | 30+ mm | 1.30 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The card holder measures 323 x 72 mm (12.7 x 2.8 in).
What materials and machines can I use?
It was checked for 2mm Leather and 3mm Cork sheet. It works with a CO₂ laser.
Can I change the text in the editor?
No, the design has no editable text fields. You can add a monogram in the editor before cutting.
