Single-slot card holder
✓ Cut-checked211 × 72 mmBeginner
This ultra-slim card holder has one slot and measures 211 x 72 mm. It suits beginner makers who want a quick leather or felt project. Use it for everyday carry or as a birthday gift.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 211 × 72 mm (8.3 × 2.8 in)
- Pieces
- 2
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · xTool M1 / M1 Ultra · Diode 400 × 400 (Ortur, Sculpfun, Falcon) · Glowforge (Basic/Plus/Pro) · xTool S1 · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Carry a single card or ID daily
- Give as a birthday or everyday gift
- Use with 2mm leather or felt for a clean finish
How to make it
Cut from 2mm leather or 3mm felt. No stitching required — simply glue or leave raw. If using leather, sand and burnish edges for a clean finish.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 2mm Leather | CO₂ laser | 30+ mm | – |
| Felt / leather (dark) | Diode laser | 30+ mm | – |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the finished piece?
The design measures 211 x 72 mm (8.3 x 2.8 in) and consists of 2 pieces.
What materials and machines can I use?
It has been checked for 2mm leather and felt/leather (dark). Use a CO₂ or diode laser.
What file formats are included?
You get SVG and DXF files. The design opens in the editor as shown with no text to change.
