Desk organizer tray, 3 compartments (240 × 120 × 60 mm): cut layout preview

Desk organizer tray, 3 compartments (240 × 120 × 60 mm)

✓ Cut-checked492 × 249 mmBeginner

A simple open-top tray split into three compartments by two dividers. It's a quick first box project: seven flat pieces, finger joints that lock square, and no hinges or lids to fuss with.

Free accounts download draft files; full-precision files come with Maker, coming soon.

Size
492 × 249 mm (19.4 × 9.8 in)
Pieces
7
Machines
CO₂ laser, Diode laser
Files
SVG and DXF, in millimetres
Skill
Beginner
Fits
Glowforge (Basic/Plus/Pro) · xTool S1 · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400 · CNC 2 × 2 ft · CNC 4 × 4 ft · CNC 4 × 8 ft

Ideas

  • Pens, rulers and markers on a desk
  • Bits, screws and small tools on a workbench
  • A drawer insert for the kitchen junk drawer

How to make it

Glue the sides into the bottom one joint at a time, then slide the two dividers into their slots. A little wood glue in each joint is enough; tape holds it while it dries.

Checked for these materials

MaterialMachineThinnest stripNarrowest opening
3mm Birch PlywoodCO₂ laser30+ mm–
3mm MDFCO₂ laser30+ mm–
3mm Hardwood (walnut, maple, cherry)CO₂ laser30+ mm–
3mm AcrylicCO₂ laser30+ mm–
3mm Plywood (2–3 passes)Diode laser30+ mm–
3mm BasswoodDiode laser30+ mm–

Measured on the exact cut lines for each material, after kerf.

Quality checks

  • ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.

Questions

How big is it?

240 × 120 × 60 mm outside (9.4 × 4.7 × 2.4 in). Inside it's 234 × 114 × 57 mm, split into three compartments.

Can I change the size or the number of compartments?

Yes. It opens in Hamrun's box designer, where you can type new sizes and divider counts; the joints and slots follow.

What materials was it checked for?

3 mm birch plywood, MDF, hardwood and acrylic on a CO₂ laser, and 3 mm plywood and basswood on a diode laser.

Related designs