
Keepsake box with lift-off lid (150 × 100 mm)
A small keepsake box with a lid that lifts straight off. A second plate under the lid sits just inside the walls, so the lid stays put without hinges. Good for gifts, baby keepsakes or a box of letters.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 568 × 206 mm (22.4 × 8.1 in)
- Pieces
- 7
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- xTool P2 / P2S · CO₂ 600 × 400 · CNC 2 × 2 ft · CNC 4 × 4 ft · CNC 4 × 8 ft
Ideas
- A memory box for a baby, wedding or anniversary
- A gift box that's part of the gift
- Storage for cards, jewelry or small keepsakes
How to make it
Glue the five box sides together first, then glue the lid locator to the underside of the lid so it sits just inside the walls. Engrave a name or date on the lid before you assemble if you want it personalized.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 30+ mm | – |
| 3mm MDF | CO₂ laser | 30+ mm | – |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 30+ mm | – |
| 3mm Plywood (2–3 passes) | Diode laser | 30+ mm | – |
| 3mm Basswood | Diode laser | 30+ mm | – |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
How big is it?
150 × 100 mm outside, and 83 mm tall with the lid on (5.9 × 3.9 × 3.3 in). Inside it's 144 × 94 × 77 mm.
How does the lid stay on?
A locator plate glued under the lid fits just inside the walls, so the lid can't slide off.
What materials was it checked for?
3 mm birch plywood, MDF and hardwood on a CO₂ laser, and 3 mm plywood and basswood on a diode laser.





