Diamond suncatcher, 150 mm
✓ Cut-checked141 × 143 mmBeginner
This diamond-pattern rosette is a suncatcher that suits everyday decor. Cut it from 3mm or 6mm acrylic and hang it in a window with clear thread. It is good for makers who want a beginner-friendly project.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 141 × 143 mm (5.6 × 5.6 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Hang in a living room window
- Give as a housewarming gift
- Display on a porch door
How to make it
Cut from acrylic; peel protective film. Hang with clear thread or fishing line through center hole.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Acrylic | CO₂ laser | 5.22 mm | 4.88 mm |
| 6mm Acrylic | CO₂ laser | 5.25 mm | 4.90 mm |
| 3mm Birch Plywood | CO₂ laser | 5.21 mm | 4.87 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 5.21 mm | 4.87 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the suncatcher?
The design is 141 x 143 mm (5.6 x 5.6 in).
What materials can I use?
It was checked for 3mm acrylic, 6mm acrylic, 3mm birch plywood, and 3mm hardwood (walnut, maple, cherry).
Which machines and beds does it fit?
It works on CO₂ lasers. It fits K40-class CO₂, Glowforge (Basic/Plus/Pro), OMTech 50 W, xTool P2 / P2S, and CO₂ 600 x 400 beds.
