Lotus wall art, 250 mm
✓ Cut-checked235 × 241 mmAdvanced
This medium lotus mandala with moderate detail is designed for wall display. At 235 x 241 mm, it suits advanced makers and fits a living room or nursery.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 235 × 241 mm (9.2 × 9.5 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Advanced
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Mount in a living room for a boho touch
- Give as a housewarming or Mother's Day gift
- Paint or stain to match the room
How to make it
Sand gently. Paint or stain if desired. Mount with double-sided tape or nail.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 5.94 mm | 4.87 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 5.94 mm | 4.87 mm |
| 3mm Acrylic | CO₂ laser | 5.92 mm | 4.88 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 235 x 241 mm (9.2 x 9.5 in).
What materials can I use?
It was checked for 3mm Birch Plywood, 3mm Hardwood (walnut, maple, cherry), and 3mm Acrylic.
What machines and file formats are supported?
It fits Glowforge (Basic/Plus/Pro), OMTech 50 W, xTool P2 / P2S, and CO₂ 600 × 400 beds. Comes in SVG and DXF. Difficulty is advanced.
