Diamond winter wreath, 160 mm
This diamond rosette with light filigree is a winter wreath decoration that suits holiday decor. Cut it from 3mm birch plywood or hardwood and hang it on a door or tree. It is good for makers who enjoy intermediate laser projects.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 148 × 155 mm (5.8 × 6.1 in)
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Hang on a front door as a wreath
- Display on a Christmas tree
- Give as a New Year gift
How to make it
Cut plywood, sand edges. Paint or stain as desired. Hang from center hole or add a ribbon hanger.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 5.38 mm | 4.46 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 5.38 mm | 4.46 mm |
| 3mm MDF | CO₂ laser | 5.41 mm | 4.45 mm |
| 3mm Basswood | Diode laser | 5.35 mm | 4.43 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the wreath?
The design is 148 x 155 mm (5.8 x 6.1 in).
What materials can I use?
It was checked for 3mm Birch Plywood, 3mm Hardwood (walnut, maple, cherry), 3mm MDF, and 3mm Basswood.
Which machines and beds does it fit?
It works on CO₂ and diode lasers. It fits K40-class CO₂, Glowforge (Basic/Plus/Pro), OMTech 50 W, xTool P2 / P2S, and CO₂ 600 x 400 beds.
