Star snowflake ornament, 130 mm
✓ Cut-checked107 × 122 mmIntermediate
This star-shaped rosette has filigree details and a hanging hole for winter decor. It measures 130 mm and suits festive or geometric style. Good for family and friends as a Christmas or New Year gift.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 107 × 122 mm (4.2 × 4.8 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Hang on a Christmas tree
- Display in a living room window
- Give as a holiday gift
How to make it
Cut from plywood or acrylic. Thread ribbon through center hole. Hang on tree.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 5.70 mm | 4.95 mm |
| 3mm Acrylic | CO₂ laser | 5.73 mm | 4.94 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 5.70 mm | 4.95 mm |
| Cardstock (stencil) | CO₂ laser | 5.72 mm | 4.97 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 107 x 122 mm (4.2 x 4.8 in).
What materials and machines can I use?
It was checked for 3mm Birch Plywood, 3mm Acrylic, 3mm Hardwood (walnut, maple, cherry), and Cardstock (stencil). It works with CO₂ lasers only.
What file formats are included?
You get SVG and DXF files. The design is intermediate-level and opens in the editor as shown.
