
Family name arch stencil, est. year
The family name curves over the top like a rainbow and the established year arcs below it in smaller letters. Change both lines in the Hamrun editor, then cut the stencil from Mylar or cardstock.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 413 × 139 mm (16.2 × 5.5 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Paint a porch sign for a new home
- Make a wedding gift with the couple's name and year
- Stencil a door plaque or mailbox board
How to make it
Tape the stencil to a sanded board, dab paint through with a sponge, and lift it straight up. Change the name and the year in the editor first.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 1.34 mm | 4.61 mm |
| Cardstock / paper | Diode laser | 1.35 mm | 4.61 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is it?
The design is 412 x 139 mm (16.2 x 5.5 in). It cuts as 1 piece: a stencil sheet with the letters as openings.
What materials and machines can I use?
It was checked for Mylar stencil film (0.25mm) and Cardstock / paper on CO₂ and diode lasers. It fits these beds: Glowforge (Basic/Plus/Pro), OMTech 50 W, xTool P2 / P2S, CO₂ 600 × 400.
Can I change the text?
Yes. Type your own text in the editor: line 1 is the name and line 2 is the year.





