COFFEE BAR paint stencil
✓ Cut-checked585 × 101 mmBeginner
This paint stencil spells COFFEE BAR in bold lettering for kitchen signs or cafe-style walls. It is good for your own coffee station or as a housewarming gift for friends. The design is beginner-friendly.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 585 × 101 mm (23.0 × 4.0 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil onto a wooden board for a coffee bar sign
- Use on a wall above a coffee station
- Reuse the stencil with Mylar for multiple projects
How to make it
Stencil onto a wooden board or wall. Use dark brown or black paint for contrast. Seal with polyurethane if near moisture. Reusable stencil if using Mylar.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 3.87 mm | 12.18 mm |
| Cardstock (stencil) | CO₂ laser | 3.69 mm | 12.45 mm |
| Cardstock / paper | Diode laser | 3.88 mm | 12.18 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 585 x 101 mm (23.0 x 4.0 in).
What materials and machines does it work with?
It was checked for Mylar stencil film (0.25mm), Cardstock (stencil), and Cardstock / paper. It works with CO₂ lasers and diode lasers.
How many pieces and what file formats are included?
It is 1 piece. File formats are SVG and DXF.
