WELCOME paint stencil
This WELCOME paint stencil features bold letters for doormats, porch signs, and entryway walls. Cut from Mylar stencil film or cardstock, it works with CO₂ and diode lasers. It suits beginners who want to create a welcoming entry.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 513 × 111 mm (20.2 × 4.4 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil onto a doormat for a welcome message
- Use on a board for a porch sign
- Reuse with Mylar for multiple projects
How to make it
Tape stencil to a clean doormat or board. Use a foam pouncer with acrylic paint, dabbing straight down. Remove while paint is wet. Reusable with Mylar.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 3.38 mm | 14.10 mm |
| Cardstock (stencil) | CO₂ laser | 3.20 mm | 14.25 mm |
| Cardstock / paper | Diode laser | 3.38 mm | 14.10 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The stencil measures 513 x 111 mm (20.2 x 4.4 in).
What materials and machines can I use?
It was checked for Mylar stencil film (0.25mm), Cardstock (stencil), and Cardstock / paper. It works with CO₂ and diode lasers.
Can I change the text in the editor?
No, the text is fixed as shown in the design. You cannot personalize it.
