WELCOME HOME paint stencil
✓ Cut-checked460 × 54 mmBeginner
This WELCOME HOME paint stencil is designed for a foyer or front porch. Cut from Mylar stencil film or cardstock, it works with CO₂ and diode lasers. It suits beginners who want to add bold lettering to a wood plank or canvas.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 460 × 54 mm (18.1 × 2.1 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil onto a wood plank for a porch sign
- Use on a canvas for indoor wall art
- Apply outdoor paint for durability
How to make it
Stencil onto a wood plank or canvas. Use outdoor paint for porch signs. Seal with a clear coat for durability.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 1.79 mm | 6.58 mm |
| Cardstock (stencil) | CO₂ laser | 1.59 mm | 6.77 mm |
| Cardstock / paper | Diode laser | 1.79 mm | 6.58 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The stencil measures 460 x 54 mm (18.1 x 2.1 in).
What materials and machines can I use?
It was checked for Mylar stencil film (0.25mm), Cardstock (stencil), and Cardstock / paper. It works with CO₂ and diode lasers.
Can I change the text in the editor?
No, the text is fixed as shown in the design. You cannot personalize it.
