HOME SWEET HOME paint stencil
✓ Cut-checked460 × 60 mmBeginner
This HOME SWEET HOME stencil lets you paint the classic greeting onto signs, walls, or decor. It cuts as one piece from Mylar or cardstock. The design suits makers who want a timeless message for their home projects.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 460 × 60 mm (18.1 × 2.3 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil onto a wood board for a porch sign
- Use on a wall for a living room accent
- Paint onto a canvas for a housewarming gift
How to make it
Secure stencil with tape. Use a stencil brush for crisp lines. Clean with water after use.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 1.59 mm | 6.84 mm |
| Cardstock / paper | Diode laser | 1.60 mm | 6.84 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the stencil?
The stencil measures 460 x 60 mm (18.1 x 2.3 in).
What materials and machines can I use?
It was checked for Mylar stencil film (0.25mm) and Cardstock / paper. It works with CO₂ and diode lasers.
How many pieces does it cut into and what file formats are included?
It cuts as 1 piece. You get SVG and DXF files.
