Leaf trivet, 200 mm
✓ Cut-checked188 × 192 mmIntermediate
This leaf-style rosette with filigree is sized as a large trivet for hot dishes. It suits a mandala or boho style. It is good for everyday use or as a housewarming or wedding gift.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 188 × 192 mm (7.4 × 7.5 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Place under hot dishes on a dining table
- Give as a wedding gift with kitchen items
- Hang on a wall as decorative art
How to make it
Sand thoroughly. Seal with food-safe mineral oil. Place under hot dishes.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 7.00 mm | 4.87 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 7.00 mm | 4.87 mm |
| 3mm MDF | CO₂ laser | 6.97 mm | 4.87 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the finished trivet?
The design measures 188 x 192 mm (7.4 x 7.5 in).
What materials can I use?
It was checked for 3 mm birch plywood, 3 mm hardwood (walnut, maple, cherry), and 3 mm MDF.
Which machines and file formats are supported?
It works with CO₂ lasers that fit a K40-class, Glowforge, OMTech 50 W, xTool P2 / P2S, or CO₂ 600 x 400 bed. You get SVG and DXF files.
