Mr. & Mrs. arch sign
The Mr. & Mrs. arch sign features bold script inside a double border with a sprig ornament below. It cuts as one connected piece from 3mm birch plywood, MDF, hardwood or acrylic. This classic sign suits wedding decor or a couple's living room.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 380 × 276 mm (15.0 × 10.9 in)
- Pieces
- 1
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Display at a wedding reception
- Hang in a living room
- Give as a wedding gift
How to make it
One connected piece: sand edges, paint or stain as desired. Mount with a sawtooth hanger or 3M strips.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 2.98 mm | 0.90 mm |
| 3mm MDF | CO₂ laser | 3.07 mm | 1.48 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 2.98 mm | 0.90 mm |
| 3mm Acrylic | CO₂ laser | 2.46 mm | 0.96 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The sign measures 380 x 276 mm (15.0 x 10.9 in).
What materials and machines does it work with?
It was checked for 3mm birch plywood, 3mm MDF, 3mm hardwood (walnut, maple, cherry) and 3mm acrylic. It works with CO₂ lasers including Glowforge, OMTech 50 W, xTool P2 / P2S and CO₂ 600 × 400 beds.
Can I change the text in the editor?
No, the design opens in the editor as shown with no text fields to change.
