Nursery name letters
The Nursery name letters are soft, rounded cut-out letters for a nursery wall or kid's door. Each letter cuts as its own piece from 3mm birch plywood, hardwood, acrylic or basswood. They suit a baby shower or birthday gift.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 539 × 141 mm (21.2 × 5.5 in)
- Pieces
- 8
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- xTool P2 / P2S · CO₂ 600 × 400
- You can change
- Child's name (up to 10 characters)
Ideas
- Spell a name on a nursery wall
- Glue to a board or wreath
- Give as a baby shower gift
How to make it
Each letter is its own piece. Sand the edges, paint or stain, then glue to a board, wreath or wall with wood glue or 3M strips. Dots on letters like i and j cut as separate pieces; glue them in place.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 21.08 mm | 27.62 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 21.08 mm | 27.62 mm |
| 3mm Acrylic | CO₂ laser | 21.19 mm | 27.55 mm |
| 3mm Basswood | Diode laser | 21.19 mm | 27.55 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The set measures 539 x 141 mm (21.2 x 5.5 in) and includes 8 pieces.
What materials and machines does it work with?
It was checked for 3mm birch plywood, 3mm hardwood (walnut, maple, cherry), 3mm acrylic and 3mm basswood. It works with CO₂ and diode lasers including xTool P2 / P2S and CO₂ 600 × 400 beds.
Can I change the text in the editor?
Yes, you can change the Child's name field (example: Olivia) up to 10 characters.
