PEACE paint stencil
This stencil spells PEACE in bold, rounded letters. Use it on porch boards, pillows, cards, and more. It suits anyone making festive painted decor.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 415 × 121 mm (16.4 × 4.8 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Paint on a porch board for a welcome sign
- Stencil onto a pillow or fabric
- Use on a card or gift tag
How to make it
Cut from 10 mil Mylar (reusable) or cardstock (one-off). Tape it down, dab paint straight down with a foam pouncer or stencil brush, keep the brush nearly dry, and lift while wet. The little bridges hold the centres of letters like O, A and R in place; touch up the gaps by hand if you want solid letters.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 4.89 mm | 19.70 mm |
| Cardstock (stencil) | CO₂ laser | 4.68 mm | 19.88 mm |
| Cardstock / paper | Diode laser | 4.86 mm | 19.70 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the stencil?
The design is 415 x 121 mm (16.4 x 4.8 in).
What materials and machines can I use?
It was checked for Mylar stencil film (0.25mm), cardstock (stencil), and cardstock/paper. Use a CO₂ or diode laser.
How many pieces does it have and what is the difficulty?
It is 1 piece and rated beginner. You get SVG and DXF files.
