LET IT SNOW stencil
The LET IT SNOW stencil is a one-line stencil for long boards and window boxes. It is cut from Mylar stencil film or cardstock. This design suits anyone adding festive decor to their porch or door.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 469 × 86 mm (18.5 × 3.4 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil onto a long wooden board
- Use on a window box for holiday cheer
- Paint onto a table runner or banner
How to make it
Cut from 10 mil Mylar (reusable) or cardstock (one-off). Tape it down, dab paint straight down with a foam pouncer or stencil brush, keep the brush nearly dry, and lift while wet. The little bridges hold the centres of letters like O, A and R in place; touch up the gaps by hand if you want solid letters.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 2.53 mm | 10.95 mm |
| Cardstock (stencil) | CO₂ laser | 2.33 mm | 11.10 mm |
| Cardstock / paper | Diode laser | 2.52 mm | 10.95 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 469 x 86 mm (18.5 x 3.4 in).
What materials and machines does it work with?
It was checked for Mylar stencil film (0.25mm), Cardstock (stencil), and Cardstock / paper. It works with CO₂ laser and Diode laser machines.
How many pieces does it have and what is the difficulty?
It has 1 piece. The difficulty is beginner.
