Layered rosette wall art, 500 mm
This layered rosette wall art is 500 mm across with 7 layers, 16-fold symmetry, and detail level 2. It comes with a backing and hanging hardware. Suits family and friends who enjoy maximalist, mandala-style decor for a living room or porch.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 500 × 500 mm (19.7 × 19.7 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Advanced
- Fits
- Larger than the common desktop beds; it needs a large-format machine or a bigger sheet.
Ideas
- Hang as a statement piece in a living room
- Display on a porch or door for housewarming
- Paint each layer a different color for contrast
How to make it
Cut each layer from 3 mm stock, paint or stain each layer a different color, stack with glue using registration pins. The backing provides stability.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 3.95 mm | 0.78 mm |
| 3mm Acrylic | CO₂ laser | 3.97 mm | 0.88 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 3.95 mm | 0.78 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- !Every cut path is closed, no zero-length segments. 2791 closed paths; 1051 tiny segments under 0.05 mm (sub-visible zig-zags). Harmless, but a cleaner file cuts smoother.
- !Narrowest opening ≥ what the machine cuts cleanly. Narrowest opening ≈ 0.78 mm as cut (after the 0.15 mm kerf): right at the 0.8 mm limit for 3mm Birch Plywood. Check a test cut for charring.
- !Pieces come out as designed (nothing falls loose). 7 layers, every piece attached; 2 tiny loose island(s) in Layer 6, Layer 7 were left out so nothing falls free (the preview already shows this).
- !Fits a common machine bed. At 500 × 500 mm it's bigger than the common beds listed; it needs a large-format machine.
- ✓Passed: No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · The generator raised no warnings.
Questions
What size is the design?
The design is 500 x 500 mm (19.7 x 19.7 in).
What materials and machines does it work with?
It was checked for 3mm Birch Plywood, 3mm Acrylic, and 3mm Hardwood (walnut, maple, cherry). It is for CO₂ lasers. Note that it is larger than common desktop laser beds and needs a large-format machine or a bigger sheet.
What is the difficulty and file format?
Difficulty is advanced. Files come as SVG and DXF.
