Layered lotus mandala, 140 mm
This 3-layer lotus mandala has 5-fold symmetry with a flower band and center detail. It works as a small wall accent or ornament and is a beginner-friendly project. Suits makers who want minimal mandala decor for a living room or office.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 134 × 140 mm (5.3 × 5.5 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Hang as a small wall accent
- Paint or stain in your choice of colours
- Give as a birthday or housewarming gift
How to make it
Cut from 3 mm plywood; paint or stain in your choice of colors. Glue layers with wood glue, using pins for alignment. Add a ribbon for hanging.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 3.47 mm | 1.05 mm |
| 3mm Acrylic | CO₂ laser | 3.46 mm | 1.06 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 3.47 mm | 1.05 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the finished piece?
The design is 134 x 140 mm (5.3 x 5.5 in).
What materials and machines can I use?
It was checked for 3mm Birch Plywood, 3mm Acrylic, and 3mm Hardwood (walnut, maple, cherry). It works on CO₂ lasers including K40-class CO₂, Glowforge (Basic/Plus/Pro), OMTech 50 W, xTool P2 / P2S, and CO₂ 600 × 400.
Can I change any text on the design?
No, this design opens in the editor as shown with no editable text fields.
