Star dream catcher ornament, 150 mm
✓ Cut-checked139 × 133 mmBeginner
This star-pattern rosette has an open center that gives it a dream catcher look. It measures 150 mm and suits boho or geometric decor. Good for friends and family as a housewarming or birthday gift.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 139 × 133 mm (5.5 × 5.3 in)
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Hang in a living room window
- Weave yarn through the open spaces
- Give as a housewarming gift
How to make it
Cut from 3mm plywood. Sand lightly. Hang with string. Optionally weave yarn through open spaces.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 7.89 mm | 5.03 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 7.89 mm | 5.03 mm |
| 3mm Acrylic | CO₂ laser | 7.91 mm | 5.05 mm |
| 3mm Basswood | Diode laser | 7.91 mm | 5.05 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 139 x 133 mm (5.5 x 5.3 in).
What materials and machines can I use?
It was checked for 3mm Birch Plywood, 3mm Hardwood (walnut, maple, cherry), 3mm Acrylic, and 3mm Basswood. It works with CO₂ and diode lasers.
What file formats are included?
You get SVG and DXF files. The design is beginner-level and opens in the editor as shown.
