Flower coaster set, 120 mm (set of 4)
✓ Cut-checked111 × 116 mmBeginner
This flower coaster set has a rounded-petal design with a star-burst centre, cut four times for a set. It is good for everyday use on tables. Suits makers who want a quick project from cork or felt.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 111 × 116 mm (4.4 × 4.6 in)
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Place under drinks on a coffee table
- Cut from cork for a natural look
- Give as a housewarming or birthday gift
How to make it
Cut from cork. No finishing needed. Use as coasters for drinks.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Cork sheet | CO₂ laser | 5.90 mm | 5.31 mm |
| 3mm Birch Plywood | CO₂ laser | 5.86 mm | 5.33 mm |
| 2mm Cork sheet | Diode laser | 5.90 mm | 5.35 mm |
| 3mm Wool felt | CO₂ laser | 5.90 mm | 5.35 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is each coaster?
Each coaster is 111 x 116 mm (4.4 x 4.6 in).
What materials can I use?
It was checked for 3mm Cork sheet, 3mm Birch Plywood, 2mm Cork sheet, and 3mm Wool felt.
What text can I change?
No text fields can be changed. The design opens in the editor as shown.
