Gear trivet, 180 mm
✓ Cut-checked158 × 175 mmIntermediate
This gear trivet is a six-spoke rosette with filigree, 180 mm. Cut it from 3 mm birch plywood, hardwood or MDF. It is a good project for making a functional kitchen piece.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 158 × 175 mm (6.2 × 6.9 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Use under hot pots and pans on the table
- Give as a housewarming or Father's Day gift
- Apply food-safe oil or wax for protection
How to make it
Sand all edges. Apply food-safe oil or wax. Use under hot pots and pans.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 9.76 mm | 4.87 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 9.76 mm | 4.87 mm |
| 3mm MDF | CO₂ laser | 9.76 mm | 4.87 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the gear trivet?
The design measures 158 x 175 mm (6.2 x 6.9 in).
What materials and machines is it checked for?
It was checked for 3 mm birch plywood, 3 mm hardwood (walnut, maple, cherry) and 3 mm MDF on a CO₂ laser.
How do I finish it for food use?
Sand all edges and apply food-safe oil or wax.
What file formats are included?
SVG and DXF.
