THANK YOU paint stencil
✓ Cut-checked557 × 92 mmBeginner
This elegant THANK YOU stencil is good for gratitude signs and gift projects. It measures 557 x 92 mm and suits bold lettering style. Good for friends and family as a wedding or everyday project.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 557 × 92 mm (21.9 × 3.6 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Paint a gratitude sign for a living room
- Use for wedding thank-you gifts
- Make teacher appreciation projects
How to make it
Secure stencil with painter's tape. Use a stencil brush and light coats. Clean with warm water.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 2.89 mm | 12.00 mm |
| Cardstock (stencil) | CO₂ laser | 2.68 mm | 12.23 mm |
| Cardstock / paper | Diode laser | 2.87 mm | 12.00 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 557 x 92 mm (21.9 x 3.6 in) and is 1 piece.
What materials and machines can I use?
It was checked for Mylar stencil film (0.25mm), Cardstock (stencil), and Cardstock / paper. It works with CO₂ and diode lasers.
What file formats are included?
You get SVG and DXF files. The design is beginner-level and opens in the editor as shown.
