BATHROOM paint stencil
✓ Cut-checked464 × 75 mmBeginner
This stencil spells BATHROOM for painting onto doors or signs. It suits makers who want a quick way to label a bathroom.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 464 × 75 mm (18.3 × 2.9 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil onto a painted bathroom door
- Use on a wooden sign for a rustic look
- Apply with a foam brush for clean edges
How to make it
Stencil onto a painted door or wooden sign. Use a level for straight placement. Apply paint with a foam brush.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 2.59 mm | 9.38 mm |
| Cardstock (stencil) | CO₂ laser | 2.38 mm | 9.53 mm |
| Cardstock / paper | Diode laser | 2.60 mm | 9.38 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the BATHROOM paint stencil design?
The design measures 464 x 75 mm (18.3 x 2.9 in).
What materials and machines was it checked for?
It was checked for mylar stencil film (0.25mm), cardstock (stencil) and cardstock/paper on CO₂ and diode lasers.
How many pieces does the design have and what is the difficulty?
It has 1 piece and is rated beginner.
