GARAGE paint stencil
✓ Cut-checked468 × 180 mmBeginner
This bold GARAGE stencil is made for painting on a garage door or wall. It has an industrial look with large lettering. Suits makers who want to label their parking area.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 468 × 180 mm (18.4 × 7.1 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil GARAGE on a garage door
- Use on a wall in a parking lot
- Apply with exterior paint for durability
How to make it
Use on garage door or wall. Tape stencil securely. Use exterior paint. Remove stencil while paint is wet.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 5.81 mm | 16.38 mm |
| Cardstock (stencil) | CO₂ laser | 5.61 mm | 16.50 mm |
| Cardstock / paper | Diode laser | 5.76 mm | 16.38 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 468 x 180 mm (18.4 x 7.1 in).
What materials can I use?
It was checked for Mylar stencil film (0.25mm), Cardstock (stencil), and Cardstock / paper.
What text can I change?
No text fields can be changed. The design opens in the editor as shown.
