EASTER EGG HUNT paint stencil
✓ Cut-checked577 × 71 mmIntermediate
This paint stencil spells EASTER EGG HUNT for spring signs, banners and party decor. Cut it from Mylar stencil film or cardstock and use pastel acrylics. It suits makers who want an intermediate project for Easter.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 577 × 71 mm (22.7 × 2.8 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Use on a spring banner
- Stencil onto a party sign
- Apply to a wooden crate for decor
How to make it
Cut on Mylar for reuse. Tape sections carefully. Use pastel acrylics. Clean stencil between colors if multi-colour.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 2.23 mm | 8.33 mm |
| Cardstock (stencil) | CO₂ laser | 2.02 mm | 8.51 mm |
| Cardstock / paper | Diode laser | 2.22 mm | 8.33 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the stencil?
The design is 577 x 71 mm (22.7 x 2.8 in) and is 1 piece.
What materials can I use?
It was checked for Mylar stencil film (0.25mm), cardstock (stencil), and cardstock or paper.
Which machines and beds does it fit?
It works on CO₂ and diode lasers. It fits xTool P2 / P2S and CO₂ 600 x 400 beds.
