MERRY EASTER paint stencil
✓ Cut-checked460 × 63 mmBeginner
This MERRY EASTER stencil is for painting on wood, fabric, or walls for spring decor. At 460 x 63 mm, it is a beginner-friendly project for family.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 460 × 63 mm (18.1 × 2.5 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil onto a wooden sign for Easter
- Use on fabric for a holiday banner
- Paint onto a wall for a festive touch
How to make it
Secure the stencil with tape or spray adhesive. Use a stencil brush with dry paint to avoid bleeding. Clean with mild soap and water.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 1.77 mm | 6.75 mm |
| Cardstock (stencil) | CO₂ laser | 1.56 mm | 6.99 mm |
| Cardstock / paper | Diode laser | 1.78 mm | 6.75 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 460 x 63 mm (18.1 x 2.5 in) and is 1 piece.
What materials can I use?
It was checked for Mylar stencil film (0.25mm), Cardstock (stencil), and Cardstock / paper.
What machines and file formats are supported?
It fits Glowforge (Basic/Plus/Pro), OMTech 50 W, xTool P2 / P2S, and CO₂ 600 × 400 beds. Comes in SVG and DXF. Difficulty is beginner.
