HELLO SPRING paint stencil
✓ Cut-checked505 × 76 mmIntermediate
This HELLO SPRING stencil is designed for garden signs, spring banners, and flower pot decor. It cuts as one piece from Mylar or cardstock. The design suits makers who want to welcome the season with a painted message.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 505 × 76 mm (19.9 × 3.0 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil onto a wooden plank for a garden sign
- Use on a terracotta pot with pastel paint
- Paint onto a banner for a spring party
How to make it
Stencil onto a wooden plank or terracotta pot. Use pastel colours. Seal with outdoor varnish if used outside. Reusable Mylar stencil.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 2.53 mm | 9.38 mm |
| Cardstock (stencil) | CO₂ laser | 2.33 mm | 9.64 mm |
| Cardstock / paper | Diode laser | 2.52 mm | 9.38 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the stencil?
The stencil measures 505 x 76 mm (19.9 x 3.0 in).
What materials and machines can I use?
It was checked for Mylar stencil film (0.25mm), Cardstock (stencil), and Cardstock / paper. It works with CO₂ and diode lasers.
How many pieces does it cut into and what file formats are included?
It cuts as 1 piece. You get SVG and DXF files.
