Wide leather key fob
This wider key fob has a generous width for a bold look. It is a single piece cut from 2mm leather that suits yourself or friends for everyday carry.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 200 × 35 mm (7.9 × 1.4 in)
- Pieces
- 1
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · xTool M1 / M1 Ultra · Diode 400 × 400 (Ortur, Sculpfun, Falcon) · Glowforge (Basic/Plus/Pro) · xTool S1 · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Attach to your keys for everyday use
- Give as a small gift for friends
- Use as a custom accessory for bags or lanyards
How to make it
Cut from 2mm leather or 3mm felt. Stitch holes are pre-spaced; saddle-stitch with waxed thread. Sand and burnish edges if using leather. Attach a key ring.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 2mm Leather | CO₂ laser | 25.60 mm | 1.30 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 200 x 35 mm (7.9 x 1.4 in).
What materials and machines can I use?
It was checked for 2mm Leather on a CO₂ laser. It fits K40-class CO₂, xTool M1 / M1 Ultra, Diode 400 × 400 (Ortur, Sculpfun, Falcon), Glowforge (Basic/Plus/Pro), xTool S1, OMTech 50 W, xTool P2 / P2S, and CO₂ 600 × 400 beds.
Can I change the text?
No, the design opens in the editor as shown with no text fields to change.
