Compact parking stencil (12")
✓ Cut-checked1592 × 1040 mmIntermediate
This pavement stencil creates a COMPACT marking for compact car spaces, with letters 12 inches tall. You can personalize the word in the editor, up to 20 characters. It suits contractors and line painters marking parking stalls in lots.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 1592 × 1040 mm (62.7 × 40.9 in)
- Machines
- CNC router
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- Split into panels for 4 × 8 ft sheets, with registration holes.
- You can change
- Word (up to 20 characters)
Ideas
- Mark compact car parking spaces
- Paint stall labels in parking lots
- Use on asphalt or concrete surfaces
How to make it
Cut from 1/8" LDPE on a CNC router. Use registration pins, spray paint, and remove stencil promptly.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 1/8″ LDPE (recommended) | CNC router | 24.98 mm | 30+ mm |
| 1/8″ HDPE | CNC router | 24.95 mm | 30+ mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the stencil?
The overall size is 1592 x 1040 mm (62.7 x 40.9 in).
What materials and machines can I use?
It was checked for 1/8″ LDPE (recommended) and 1/8″ HDPE, and is designed for a CNC router.
Can I change the text?
Yes, the Word field can be changed to any text up to 20 characters.
