Expectant mother parking symbol
This is the expectant-mother stall symbol for private lots at the editor's standard size. It is a trade item for line painters that suits business and contractors for parking lot use.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 518 × 1350 mm (20.4 × 53.1 in)
- Machines
- CNC router
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- Split into panels for 4 × 8 ft sheets, with registration holes.
Ideas
- Spray stencil for expectant mother parking stalls
- Use on asphalt or concrete surfaces
- Create private lot markings
How to make it
Cut from 1/8" LDPE on a CNC router (or a large CO₂ laser for Mylar). Panels overlap and have matching registration holes: pin them together, spray marking paint straight down, and lift before it skins.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 1/8″ LDPE (recommended) | CNC router | 30+ mm | 30+ mm |
| 1/8″ HDPE | CNC router | 30+ mm | 30+ mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 518 x 1350 mm (20.4 x 53.1 in).
What materials and machines can I use?
It was checked for 1/8″ LDPE (recommended) and 1/8″ HDPE on a CNC router. It is split into panels for 4 x 8 ft sheets with registration holes.
Can I change the text?
No, the design opens in the editor as shown with no text fields to change.
