FIRE LANE lettering, 24 in
This pavement stencil set gives you individual letters for FIRE LANE in 24-inch highway style. Each letter is its own stencil, making it easy to lay out and paint. It suits contractors and line painters working on parking lots or access lanes.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 2239 × 1779 mm (88.1 × 70.0 in)
- Machines
- CNC router
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- Split into panels for 4 × 8 ft sheets, with registration holes.
Ideas
- Mark fire lanes in commercial parking lots
- Paint access lanes for emergency vehicles
- Use on asphalt or concrete surfaces
How to make it
Cut from 1/8" LDPE on a CNC router (or a large CO₂ laser for Mylar). Panels overlap and have matching registration holes: pin them together, spray marking paint straight down, and lift before it skins.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 1/8″ LDPE (recommended) | CNC router | 24.98 mm | 30+ mm |
| 1/8″ HDPE | CNC router | 24.95 mm | 30+ mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the stencil?
The overall size is 2239 x 1779 mm (88.1 x 70.0 in).
What materials and machines can I use?
It was checked for 1/8″ LDPE (recommended) and 1/8″ HDPE, and is designed for a CNC router.
How does it fit on my machine bed?
The design is split into panels for 4 x 8 ft sheets, with registration holes for alignment.
