Gear ornament minimal, 130 mm
✓ Cut-checked118 × 117 mmBeginner
This gear ornament is a small 5-spoke rosette with no filigree, 130 mm. Cut it from plywood, acrylic, hardwood or basswood. It is a good beginner project for making a hanging decoration.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 118 × 117 mm (4.6 × 4.6 in)
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Hang on a wall or in a window as decor
- Give as a New Year or everyday gift
- Paint or leave natural for an industrial look
How to make it
Cut from plywood or acrylic. Sand edges. Hang with string through center hole.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 6.92 mm | 6.83 mm |
| 3mm Acrylic | CO₂ laser | 6.88 mm | 6.85 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 6.92 mm | 6.83 mm |
| 3mm Basswood | Diode laser | 6.88 mm | 6.85 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the gear ornament?
The design measures 118 x 117 mm (4.6 x 4.6 in).
What materials and machines is it checked for?
It was checked for 3 mm birch plywood, 3 mm acrylic, 3 mm hardwood (walnut, maple, cherry) and 3 mm basswood on a CO₂ laser or diode laser.
How do I finish and hang it?
Sand edges and hang with string through the center hole.
What file formats are included?
SVG and DXF.
