HAPPY BIRTHDAY paint stencil
✓ Cut-checked496 × 65 mmIntermediate
This paint stencil spells HAPPY BIRTHDAY for banner signs, gift tags and party decor. Cut it from mylar stencil film, cardstock or paper. It suits anyone making birthday decorations.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 496 × 65 mm (19.5 × 2.6 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Use on fabric for a birthday banner
- Use on wood for a reusable party sign
- Layer multiple colours for a festive effect
How to make it
Use on fabric for a banner or on wood for a sign. Multiple colours can be layered. For fabric, use fabric paint and heat-set. Stencil may need careful alignment.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 2.89 mm | 7.19 mm |
| Cardstock (stencil) | CO₂ laser | 2.68 mm | 7.39 mm |
| Cardstock / paper | Diode laser | 2.87 mm | 7.19 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the stencil?
The design measures 496 x 65 mm (19.5 x 2.6 in) and is one piece.
What materials and machines is it checked for?
It was checked for mylar stencil film (0.25 mm), cardstock (stencil) and cardstock/paper on a CO₂ laser or diode laser.
How do I use it on fabric?
Use fabric paint and heat-set after drying.
What file formats are included?
SVG and DXF.
