
MR & MRS round sign stencil, 200 mm
MR & MRS arcs over the top of the circle and the year runs along the bottom, sized for a wood slice or round sign about 200 mm across. Change the year (or the words) in the Hamrun editor before you cut it.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 202 × 199 mm (8.0 × 7.8 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Paint a wood-slice sign for a wedding table
- Make an anniversary gift with the wedding year
- Stencil a round door sign for newlyweds
How to make it
Tape the stencil to a sanded wood slice or round sign at least 200 mm across. Dab paint on with a sponge, a little at a time, then lift the stencil straight up and clean it right away.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 1.34 mm | 4.65 mm |
| Cardstock / paper | Diode laser | 1.35 mm | 4.65 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is it?
The design is 202 x 199 mm (8.0 x 7.8 in). It cuts as 1 piece: a stencil sheet with the letters as openings.
What materials and machines can I use?
It was checked for Mylar stencil film (0.25mm) and Cardstock / paper on CO₂ and diode lasers. It fits these beds: K40-class CO₂, Glowforge (Basic/Plus/Pro), OMTech 50 W, xTool P2 / P2S, CO₂ 600 × 400.
Can I change the text?
Yes. Type your own text in the editor: line 1 is MR & MRS and line 2 is the year.





