Pickup parking stencil (12")
This is a 12-inch tall PICKUP stencil for designated pickup spots. It is sized like common parking-lot lettering. It suits line painters and contractors who need bold, clear markings on asphalt or concrete.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 1467 × 1040 mm (57.8 × 40.9 in)
- Machines
- CNC router
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- Split into panels for 4 × 8 ft sheets, with registration holes.
- You can change
- Word (up to 20 characters)
Ideas
- Mark pickup spots in parking lots
- Use on asphalt near store entrances
- Finish with bright yellow or white marking paint
How to make it
Cut from 1/8" LDPE on a CNC router. Align panels with registration holes, spray paint evenly, and lift before paint skins.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 1/8″ LDPE (recommended) | CNC router | 24.98 mm | 30+ mm |
| 1/8″ HDPE | CNC router | 24.95 mm | 30+ mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is this stencil?
The overall size is 1467 x 1040 mm (57.8 x 40.9 in).
What materials and machines were it checked for?
It was checked for 1/8″ LDPE (recommended) and 1/8″ HDPE, and is designed for a CNC router.
Can I change the text in the editor?
Yes, you can change the Word field up to 20 characters. The design is split into panels for 4 x 8 ft sheets with registration holes.
