PLAYROOM paint stencil
The PLAYROOM paint stencil spells out a playful word for a kids' room wall or door. Cut it from mylar stencil film or cardstock and use a bright color. It suits a nursery or play area.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 465 × 84 mm (18.3 × 3.3 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil above a play area
- Mark a kid's bedroom door
- Paint onto a canvas for a gift
How to make it
Stencil onto a wall or door in a bright color. Use painter's tape to hold stencil. Clean with water after use.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 2.98 mm | 10.60 mm |
| Cardstock (stencil) | CO₂ laser | 2.79 mm | 10.88 mm |
| Cardstock / paper | Diode laser | 2.99 mm | 10.60 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The stencil measures 465 x 84 mm (18.3 x 3.3 in).
What materials and machines does it work with?
It was checked for mylar stencil film (0.25mm), cardstock (stencil) and cardstock/paper. It works with CO₂ and diode lasers including Glowforge, OMTech 50 W, xTool P2 / P2S and CO₂ 600 × 400 beds.
Can I change the text in the editor?
No, the design opens in the editor as shown with no text fields to change.
