SWEET DREAMS paint stencil
This is a paint stencil that spells SWEET DREAMS in a gentle font. You make a wall stencil for a nursery or child's room. It suits parents or gift-givers who want a soft pastel decoration above a crib.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 461 × 66 mm (18.2 × 2.6 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil above a crib or changing table
- Use with soft pastel paint for a calm look
- Make as a baby shower gift
How to make it
Stencil above the crib or on a wall. Use a soft pastel paint. Clean stencil immediately after use.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 2.03 mm | 7.71 mm |
| Cardstock (stencil) | CO₂ laser | 1.83 mm | 7.95 mm |
| Cardstock / paper | Diode laser | 2.05 mm | 7.71 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 461 x 66 mm (18.2 x 2.6 in) and is 1 piece.
What materials and machines work?
It was checked for Mylar stencil film (0.25mm), Cardstock (stencil), and Cardstock / paper. Use a CO₂ laser or diode laser with a bed that fits Glowforge (Basic/Plus/Pro), OMTech 50 W, xTool P2 / P2S, or CO₂ 600 × 400.
Can I change the text?
No, the design opens in the editor as shown. There is no text to personalize.
