Reserved parking stencil (12")
This is a 12-inch tall RESERVED lettering stencil for private lots. It is cut from LDPE or HDPE with bridges and margins. It suits line painters and contractors who need bold, clear markings on asphalt or concrete.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 1580 × 1040 mm (62.2 × 40.9 in)
- Machines
- CNC router
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- Split into panels for 4 × 8 ft sheets, with registration holes.
- You can change
- Word (up to 20 characters)
Ideas
- Mark reserved spots in private parking lots
- Use on asphalt near building entrances
- Finish with bright yellow or white marking paint
How to make it
Cut from 1/8" LDPE on a CNC router. Position panels with registration pins, spray marking paint straight down, and lift before paint skins.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 1/8″ LDPE (recommended) | CNC router | 24.98 mm | 30+ mm |
| 1/8″ HDPE | CNC router | 24.95 mm | 30+ mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is this stencil?
The overall size is 1580 x 1040 mm (62.2 x 40.9 in).
What materials and machines were it checked for?
It was checked for 1/8″ LDPE (recommended) and 1/8″ HDPE, and is designed for a CNC router.
Can I change the text in the editor?
Yes, you can change the Word field up to 20 characters. The design is split into panels for 4 x 8 ft sheets with registration holes.
